Cookie-Zustimmung verwalten

Wir verwenden Technologien wie Cookies, um Geräteinformationen zu speichern und/oder darauf zuzugreifen. Wir tun dies, um das Surferlebnis zu verbessern und um personalisierte Werbung anzuzeigen. Wenn Sie diesen Technologien zustimmen, können wir Daten wie das Surfverhalten oder eindeutige IDs auf dieser Website verarbeiten.

Cookie-RichtlinieDatenschutzImpressum
envoii Logo
NEW: envoii AI Assistant

All the knowledge of your production. One question away.

The envoii AI Assistant captures know-how, hands-on experience and documentation from your daily production – and makes it available to your team in a structured way. Right on the shop floor, with traceable internal sources.

GDPR compliant
Hosted in Europe 🇪🇺
Answers only from internal sources – with evidence

envoii AI Assistant

Online · answers only from internal knowledge

The injection moulding machine SGM-450 is producing bubbles in the plastic end product. What can I do?
Bubble formation usually indicates moisture in the granulate or an excessively high melt temperature. According to your internal defect documentation, this issue was last resolved with the following steps: 1) check granulate pre-drying at 80 °C for 4 hours, 2) reduce melt temperature by 10 °C, 3) slightly increase back pressure. Your colleague M. Weber documented this in March – success rate: 100%.
Ask the AI Assistant...
Operating manuals
Maintenance & inspection reports
Work instructions with video
Colleagues' hands-on knowledge

envoii AI Assistant

Structures the knowledge and makes it available to your entire team

Knowledge that would otherwise be lost

When experienced employees retire, decades of know-how leave the company. With the envoii AI Assistant you capture hands-on experience from daily production permanently – and make it available to everyone on the team.

Experience-based knowledge is captured automatically from reports and documentation

New employees find answers on their own – without constantly having to ask

Knowledge stays in the company, even when staff change

Operating manuals as a knowledge source

Never page through 200 pages again

Give the AI every machine's operating manual as know-how. Error codes, known faults and maintenance notes – all instantly available, right on the shop floor.

1. Upload the operating manual

Simply upload the PDF of the machine documentation – whether 20 or 200 pages.

2. AI structures the knowledge

Error codes, maintenance intervals and safety notes are captured automatically.

3. Just ask instead of searching

Your team asks the AI Assistant – and gets the answer including the page reference.

envoii AI Assistant

Online · answers only from internal knowledge

What does error code E-417 on the hydraulic press HX-200 mean?
Error code E-417 stands for "pressure drop in hydraulic circuit 2". According to the operating manual, the most common causes are a worn seal on the main cylinder or an oil level that is too low. Recommended immediate action: check the oil level (target: 45–50 L) and visually inspect the cylinder seal. Caution: depressurise the machine before inspection (chapter 3.2, safety instructions).
Ask the AI Assistant...

One assistant. Every area of your production.

From the shop floor to service assignments at the customer site: this is how the envoii AI Assistant supports your team every day – always with traceable internal sources.

Maintenance & servicing

Resolve faults faster – with the knowledge of experienced colleagues

Every fault resolved and every maintenance report becomes retrievable knowledge. The AI Assistant knows the history of each machine and suggests proven solutions – even when the experienced colleague is on holiday.

envoii AI Assistant

Online · answers only from internal knowledge

The CNC milling machine F-12 vibrates unusually strongly at high speeds. Has this happened before?
Yes, this problem already occurred in January. The cause at the time was an imbalance in the spindle mount due to chip deposits. Solution according to the maintenance report: clean the spindle mount and check that the tool holder is seated correctly. Time to resolve: approx. 30 minutes. In addition, the maintenance plan recommends a spindle inspection every 500 operating hours – the last one was 620 hours ago.
Ask the AI Assistant...
Quality assurance

Inspection knowledge instantly available – informed decisions on the line

Tolerances, inspection instructions and past deviations: the AI Assistant gives your inspectors all relevant information in seconds – including how similar cases were assessed in the past.

envoii AI Assistant

Online · answers only from internal knowledge

Component 4711 has a surface roughness of Ra 3.4 µm. Is that still within tolerance?
No. According to the inspection plan for component 4711, the permissible surface roughness is max. Ra 3.2 µm. The deviation is 0.2 µm. Note: a similar case in April was classified as rework (polishing, operation P-7). Please document this as a deviation and block the batch until QA management has decided.
Ask the AI Assistant...
Assembly & manufacturing

Assembly knowledge on demand – for new employees too

Tightening torques, sequences, special cases: what otherwise only lives in the heads of experienced workers is answered by the AI Assistant right at the workstation. New employees become productive faster – without constantly having to ask.

envoii AI Assistant

Online · answers only from internal knowledge

What tightening torque do I use for the housing screws on assembly BG-300?
The housing screws (M8, positions 4–12) of assembly BG-300 are tightened to 22 Nm – crosswise, in two stages (first 15 Nm, then 22 Nm). Important: for variant BG-300-X with an aluminium housing, 18 Nm applies instead. You can find the corresponding assembly instruction with video in operation 6.
Ask the AI Assistant...
Service assignments

Deployed worldwide – all company knowledge in your luggage

On site with the customer, every minute counts. Your service technicians access commissioning protocols, previous service reports and machine documentation worldwide – without calling head office.

envoii AI Assistant

Online · answers only from internal knowledge

I'm at the customer Müller GmbH to repair system A-7. What was documented during the last commissioning?
System A-7 was commissioned in November 2025 (SAT successful). Documented particularities: the frequency converter was limited to 47 Hz for this customer, and a sensor of the older series was installed on conveyor 2 (spare part no. 88-412). During the last service assignment in February, an intermittent fault in the emergency stop circuit was also fixed – details are in the service report.
Ask the AI Assistant...
🇪🇺Made & Hosted in Europe

AI you can trust

Your production knowledge is your most valuable asset. That is why we rely on maximum security, European hosting and complete traceability.

Hosted in Europe

All data is processed and stored exclusively on servers in Europe. Your knowledge never leaves the European legal area.

100% GDPR compliant

Data protection to European standards. Your production data and know-how stay protected – contractually secured.

Only substantiated answers

The AI Assistant answers exclusively on the basis of your stored documents and experience – every statement with a direct source reference. If there is no basis in your sources, there is no answer instead of freely generated text.

Your knowledge stays yours

Your data is not used to train third-party AI models. Your competitive advantage stays inside your company.

See the AI Assistant live

In a 30-minute demo we show you how the envoii AI Assistant captures your production knowledge and makes it available to your team.

Free 30-minute demo
Individual consultation for your use case
No IT effort – ready to use immediately
Made & hosted in Germany
Book a demo now